Yamaha VXC2P Dante/PoE Powered Ceiling Speaker

  • Dante PoE powered ceiling speaker as a part of ADECIA Solution.
  • Brand:
  • Product Code:VXC2P
Contact for Price
Dante PoE powered ceiling speaker as a part of ADECIA Solution

Simple installation and seamless connectivity with any Dante output device
Creates enhanced flexibility for the ADECIA Solution - Optimised performance when used in conference rooms
A single PoE+ network cable connection avoids complex wiring and enables audio control via Dante
Full-range, bass-reflex, powered speaker
160° horizontal directivity angle for a large coverage area
1.9kg Φ225×D133mm (U.S.A., Canada and Mexico models) , 1.8kg Φ225×D133mm (Othe countries models)
General specifications Speaker type Full-range bass-reflex powered speaker
Frequency range (-10dB) 80Hz-20kHz
Nominal coverage 160°conical
Component configuration 6.4 cm (2.5-inch) full-range driver
Maximum output level 97 dB SPL
Power rating Dynamic 15W (PoE+(IEEE802.3at)), 6W (PoE(IEEE802.3af))
Continuous 15W (PoE+(IEEE802.3at)), 6W (PoE(IEEE802.3af))
Dimensions (Φ x D) ∅225 × D133 mm (including grille)
Weight U.S.A., Canada and Mexico models: 1.9 kg (including grille), Other countries models: 1.8 kg (including grille)
In Operation Temperature 0 °C - 40 °C
Humidity 30% - 90% (non-condensing)
Storage Temperature −20 °C - 60 °C
Humidity 20% - 90% (non-condensing)
Finish White
I/O connectors RJ-45 (PoE/Dante) x1
Controls 8-switch DIP switch × 1
Indicators Power (front), SYNC (RJ-45), LINK/ACT (RJ-45)
Protection circuit Speaker processing Overheating protection, overpower output protection, overvoltage input protection
Amplifier protection Overheating protection, short circuit protection, DC detection protection, overvoltage protection, undervoltage protection
Power supply protection Overcurrent protection, overheating protection
Cooling Natural air cooling
Power requirements PoE+ (IEEE 802.3at), PoE (IEEE 802.3af)
Power consumption Idle : 4.0W, 1/8 : 6.2 W (PoE+ (IEEE 802.3at)), 4.9 W (PoE (IEEE 802.3af))
Maximum power consumption 25.5 W (PoE+ (IEEE 802.3 at)), 12.95 W (PoE (IEEE 802.3 af))
Magnetic shielding Non-magnetic shielding type
Dust and water resistant Non-compliant
Certificate VCCI, UL2043 (with Terminal cover) *U.S.A., Canada and Mexico models only
Signal Processing EQ/Enhancer, Volume, PEQ, Ducker (noise gate), Mixer, Delay, Speaker EQ (6 band)
Options Reinforcing bracket kit AB-C2
Accessories Grille, cutout template, safety wire, Owner’s Manual, Safety Guide, Installation/Dimensional diagrams