Nexo LS18 Sub Bass Loudspeaker
The LS18
subbass cabinet brings new versatility to NEXO GEO S12 line array systems and
PS Series cabinets, delivering high SPL at a relatively low cost. Light
and easy-to-handle, the LS18 uses a single 18″ long excursion driver and is
compatible with all GEO S12 accessories, so it can fly with the S1230 and S1210
line array modules, or anchor a ground stack of S12 cabinets. With a steel
stand fitting on top of the cabinet, the LS18 also allows for pole mounting of
GEO S12 cabinets or NEXO PS15-R2 full-range speakers. LS18 can be flown in
tandem with PS15s, which will be of particular interest to the installation
sector.
KEY FEATURES
· High power system
(137-140dB peak SPL @ 1m)
· Frequency response
30Hz-130Hz
· 1 x 18" 4" voice
coil long excursion 8Ω driver
· Light and easy to handle
· Integrates with GEO S12 and PS Systems
| Frequency Response [a] | 35 Hz - 120 Hz ±3dB |
| Usable Range @-6dB [a] | 32Hz - 130 Hz |
| Sensitivity 1W @ 1m [b] | 107 dB SPL Nominal |
| Nominal Peak SPL @ 1m [b] | 137 to 140 dB Peak |
| Nominal Impedance | 8 Ω |
| Crossover Frequencies | 60 Hz – 85 Hz - 120 Hz Active |
| Amplified Controller | NXAMP4x1: 2 x LS18 in parallel on 2 bridged channels |
| NXAMP4x4: 2 x LS18 on 1 channel | |
| Components | 1 x 18’’ (46cm) 4’’ voice coil long excursion 8 Ω driver |
| Height x Width x Depth | 510 x 675 x 775 mm (20.1” x 26.1” x 30.5”) |
| Weight : Net | 55.5 kg (122.3 lb) |
| Connectors | 2 x NL4MP Speakon 4 pole |
| Construction | Baltic Birch Ply & structured black coating |
| Handles | 4 metal recessed pockets (2 per side) |
| Front finish | Molded Dark Grey Metal Grill |
| Flying Points | Two side plates connecting with external accessories |
| Stand fittings | Internal Steel Stand Fitting on Top (35mm, 1"3/8) allows pole mounting for PS15 or Geo S12 |

