Clockaudio CUI-2 USB Stereo Microphone Preamp Interface

Contact for Price

Easy to install with under table mounting
USB Stereo Microphone Preamp Interface (stereo mode is only compatible with stereo capable soft codecs)
Stereo Mode and Mute Sync Compatible with Zoom meetings app*
USB Bus Powered, 24-bit/48kHz, Plug-and-Play driverless with PC and MAC & others
Low Noise Design, Optimized for Clockaudio Microphones
10-50dB Gain Control
48V Phantom Power
Touch Switch Port For use with Clockaudio Capacitive Touch Switches
LED Brightness Control
RGB Color Selection for Mute and Unmute
Latching Mute and Push to Mute Modes
VU Metering for Microphone Gain Setup via TS buttons
Demo Mode Plays Audio Test Tone to USB Input and RGB Color Show
Compact Aluminum Enclosure with Flange Mounts
Mounts Under Desk or Table with Two Screws
Tamper Resistant Front Cover Included
Optional 12V External Supply

Audio Specifications
Input Type	Balanced and RF filtered
Gain	Variable, 10-50dB
Input Impedance	2.5K ohms
Phantom Power	48V, always on
Terminal Block Replacement PN	Molex 39500-0006
EIN	-122dBu
System THD+N	<0.01% at any gain, input signal 3dB below maximum
Frequency Response	20Hz - 20kHz, +/- 1dB @ 40dB Gain
General Specifications
TS Control Device Input	RJ45, interfaces with Clockaudio TS-C1 and Clockaudio Touch Switches
Power Consumption (USB type B)	2W
Max Product Dimensions	5.07" x 3.35" x 1.44"
Mounting Slot Mounting Dimension	4.625" to 4.75" center to center
Recommended Mounting Screw	#6
Unit Weight	0.5 lbs
Packaged Weight	0.8 lbs