Adamson CS10
The CS10 is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson’s proprietary network platform, the CS10 employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the loudspeaker are controlled and monitored through Adamson’s proprietary CS software.
Acoustically, the CS10 contains 2x 10-inch Kevlar® Neodymium transducers and a 4” compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 110° x 10° (H x V). The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the farfield. Patented Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection.
Frequency Range (+/-3 dB) | 60 Hz - 18 kHz |
Nominal Directivity (-6 dB) H x V | 110° x 10° |
Maximum Peak SPL** | 141.3 dB |
Components LF | 2x ND10-LM 10” Kevlar® Neodymium Driver |
Components HF | Adamson NH4 4” Diaphragm / 1.5” Exit Compression Driver |
Rigging | Slidelock Rigging System |
Connection | Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR |
Height Front (mm / in) | 265 / 10.4 |
Height Back (mm / in) | 178 / 7 |
Width (mm / in) | 737 / 29 |
Depth (mm / in) | 526 / 20.7 |
Weight (kg / lbs) | 31 / 68.4 |
Amplification | 2 channel Class-D, 2400 W total output |
Input Voltage | 100 - 240 V |
Current Draw | 0.45 A rms idle, 1.7 A rms long-term, 10 A max peak |
Supported Processing | Onboard / Proprietary |